ETS2 and ATS Profiles :) Logitech G29

Would you like to share your game profiles with others? Feel free to upload them here.
Posts: 8
Joined: 06 Feb 2017, 14:19
Location: UK

ETS2 and ATS Profiles :) Logitech G29

Postby pete_agreatguy » 29 Jan 2018, 14:51

UPDATED: 11th Feb 2019

Profile sets for Euro Truck Simulator 2 and American Truck Simulator by SCS Software.


1) I setup the LEDs based upon ECO driving! Therefore you are instructed to change gear (red lights flashing) when the engine revs are approaching the end of the "green zone".

2) These are all set for a 12 speed (ETS2) or 18 speed (ATS) gearbox. If you use a different gearbox, you need to edit the profile so it meets the X speed gearbox you use (e.g. 6 for ETS2 or 13 for ATS). You do not need to change the led rev values, just the amount of gears.

Download the profile files attached to your Fanaleds profiles folder:
"C:\Users\[username]\AppData\Roaming\FanaLEDs" (Windows 7).

Windows 8, 8.1 and 10 should be the same.

Remember to show hidden files and folders otherwise the folder will not be there :)

Any issues or suggestions, please reply below :)

11th Feb 2019: Added the VNL truck for ATS & the MAN Euro 6 truck to ETS2. Also, I spent 2 hours re-tweaking all trucks for both ETS2 and ATS!

5th April 2018: Updated ETS2 to include all trucks (to date). Tweaked all of them!
(1.83 KiB) Downloaded 106 times
(3.11 KiB) Downloaded 274 times

Who is online

Users browsing this forum: No registered users and 1 guest