Above Fanaleds 2.2b version crash
Re: Above Fanaleds 2.2b version crash
So Fanaleds crashed as soon as you plug in the CSR, not the pedals?
Re: Above Fanaleds 2.2b version crash
Pedal is always connected to the computer, the wheel has a power switch.
IF first connect wheel (before start fanaleds) and the pedal after start it, only crash when i create anything change in program, but
if i first connect the pedal, and when fanaleds start the wheel, when wheel connected fanaleds crash.
If both connect before start fanaleds, same as first if.
Crash when wheel connected before fanaleds start, and then the pedal connected.
Start fanaled, connect pedal, and after this connect wheel. crach when wheel connected
Crach: Start fanaleds, connect wheel, connect pedal. crash after pedal connected.
IF first connect wheel (before start fanaleds) and the pedal after start it, only crash when i create anything change in program, but
if i first connect the pedal, and when fanaleds start the wheel, when wheel connected fanaleds crash.
If both connect before start fanaleds, same as first if.
Crash when wheel connected before fanaleds start, and then the pedal connected.
Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 128
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 0
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 48 => value 8135
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 49 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 53 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 50 => value 255
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
6: \\?\hid#vid_16d0&pid_0639#6&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 1 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick PTR Pedals:HB00010 => button 137 => value 128
6: joystick PTR Pedals:HB00010 => button 137 => value 0
7: joystick PTR Pedals:HB00010 => axel 51 => value 2048
7: joystick PTR Pedals:HB00010 => axel 50 => value 2048
7: joystick PTR Pedals:HB00010 => axel 49 => value 2048
7: joystick PTR Pedals:HB00010 => axel 48 => value 2048
7: GUI: received focus
Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
7: GUI: received focus
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_16d0&pid_0639#6&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 0 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick PTR Pedals:HB00010 => button 137 => value 128
6: joystick PTR Pedals:HB00010 => button 137 => value 0
7: joystick PTR Pedals:HB00010 => axel 51 => value 2048
7: joystick PTR Pedals:HB00010 => axel 50 => value 2048
7: joystick PTR Pedals:HB00010 => axel 49 => value 2048
7: joystick PTR Pedals:HB00010 => axel 48 => value 2048
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 128
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 0
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 48 => value 8107
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 49 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 53 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 50 => value 255
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
6: \\?\hid#vid_16d0&pid_0639#6&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 1 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick PTR Pedals:HB00010 => button 137 => value 128
6: joystick PTR Pedals:HB00010 => button 137 => value 0
7: joystick PTR Pedals:HB00010 => axel 51 => value 2048
7: joystick PTR Pedals:HB00010 => axel 50 => value 2048
7: joystick PTR Pedals:HB00010 => axel 49 => value 2048
7: joystick PTR Pedals:HB00010 => axel 48 => value 2048
Last edited by KommyKT on 10 Sep 2014, 15:43, edited 1 time in total.
Re: Above Fanaleds 2.2b version crash
Same problem with fanaled 2.2h version
Re: Above Fanaleds 2.2b version crash
Same probleme here.
Any version higher than 2.2b crashes.
My devices: Logitech g25, SLI-M, DSD Button Box
Any suggestions?
Any version higher than 2.2b crashes.
My devices: Logitech g25, SLI-M, DSD Button Box
Any suggestions?
Re: Above Fanaleds 2.2b version crash
i create a new log file with latest version (2.2h) debug level 10
I removed all hardvare, start fanaleds, after start power on Fanatec CSR-E wheel, everythings work fine, after that connect pedal (PTR Pedals), the program is crashed. The latest version that work 2.2b.
I removed all hardvare, start fanaleds, after start power on Fanatec CSR-E wheel, everythings work fine, after that connect pedal (PTR Pedals), the program is crashed. The latest version that work 2.2b.
Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#8&39a3b7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&1e2c8600&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&1ee7b7e2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#8&39a3b7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&1e2c8600&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&1ee7b7e2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&7a7caf9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 128
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 0
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 48 => value 8229
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 49 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 53 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 50 => value 255
7: GUI: received focus
7: GUI: received focus
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#8&39a3b7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&1e2c8600&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&1ee7b7e2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&7a7caf9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
6: \\?\hid#vid_16d0&pid_0639#7&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 1 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
Last edited by KommyKT on 23 Nov 2014, 16:48, edited 1 time in total.
Re: Above Fanaleds 2.2b version crash
We're trying to get hold of one of these USB products in order to test this thoroughly, we can't as of yet promise anything
Who is online
Users browsing this forum: No registered users and 11 guests
