Page 1 of 1

Fana-Dirt Rally not recognize car

Posted: 01 Dec 2017, 15:38
by Martyn
Hi i´m trying to make work my Fana BMW rim (connected to OSW small mige via Teensy) with Dirt Rally.
I´ve read plenty of material but still can´t make the led rev lights working. Segment display is ok now finally.
The problem is i can not make car profiles as the fanaled does not detect car from dirt rally. And without the profiles it does not work at all.
Any help, please?

Re: Fana-Dirt Rally not recognize car

Posted: 01 Dec 2017, 15:40
by Martyn
Btw this is my hardware_settings_config xml (i ´m sending data also to simhub and simtools, which both works great).
<motion_platform>
<dbox enabled="true" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="20777" delay="1" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="4123" delay="1" />
<udp enabled="true" extradata="3" ip="127.0.0.1" port="30500" delay="1" />
<fanatec enabled="false" pedalVibrationScale="1.0" wheelVibrationScale="1.0" ledTrueForGearsFalseForSpeed="false" />
</motion_platform>

I tied fanatec enabled set to true - what caused that even the segment and buttons stop working:)
And ledTrueForGearsFalseForSpeed="false" to true what caused nothing..

Re: Fana-Dirt Rally not recognize car

Posted: 03 Dec 2017, 10:18
by Bose321
You can try to use 'default' as car for a car profile.