Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 128
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 0
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 48 => value 8135
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 49 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 53 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 50 => value 255
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
6: \\?\hid#vid_16d0&pid_0639#6&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 1 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick PTR Pedals:HB00010 => button 137 => value 128
6: joystick PTR Pedals:HB00010 => button 137 => value 0
7: joystick PTR Pedals:HB00010 => axel 51 => value 2048
7: joystick PTR Pedals:HB00010 => axel 50 => value 2048
7: joystick PTR Pedals:HB00010 => axel 49 => value 2048
7: joystick PTR Pedals:HB00010 => axel 48 => value 2048
7: GUI: received focus
Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
7: GUI: received focus
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_16d0&pid_0639#6&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 0 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick PTR Pedals:HB00010 => button 137 => value 128
6: joystick PTR Pedals:HB00010 => button 137 => value 0
7: joystick PTR Pedals:HB00010 => axel 51 => value 2048
7: joystick PTR Pedals:HB00010 => axel 50 => value 2048
7: joystick PTR Pedals:HB00010 => axel 49 => value 2048
7: joystick PTR Pedals:HB00010 => axel 48 => value 2048
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 128
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 0
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 48 => value 8107
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 49 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 53 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 50 => value 255
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#7&5bac132&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&38f2b3e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&56c22b9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&2d2424ed&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
6: \\?\hid#vid_16d0&pid_0639#6&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 1 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick PTR Pedals:HB00010 => button 137 => value 128
6: joystick PTR Pedals:HB00010 => button 137 => value 0
7: joystick PTR Pedals:HB00010 => axel 51 => value 2048
7: joystick PTR Pedals:HB00010 => axel 50 => value 2048
7: joystick PTR Pedals:HB00010 => axel 49 => value 2048
7: joystick PTR Pedals:HB00010 => axel 48 => value 2048
Code: Select all
0: Log opened with debug level: 4
0: Log opened with debug level: 10
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#8&39a3b7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&1e2c8600&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&1ee7b7e2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
7: GUI: received focus
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-572
7: GUI: received focus
7: GUI: paint event start
7: GUI: paint event finished
0: Autoupdater: Running latest available version.
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#8&39a3b7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&1e2c8600&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&1ee7b7e2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&7a7caf9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 128
6: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => button 137 => value 0
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 48 => value 8229
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 49 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 53 => value 255
7: joystick Fanatec CSR Wheel:RAWID-0eb7-0011 => axel 50 => value 255
7: GUI: received focus
7: GUI: received focus
6: Checking for hardware change
6: Beginning device enumeration
4: HARDWARE: hardware hotplug event
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#vid_040d&pid_3407&mi_03#8&39a3b7b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c315#6&1e2c8600&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_04d9&pid_0499#6&1ee7b7e2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_0011#6&7a7caf9&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: Fanatec CSR Wheel vendor: Fanatec ver: 12.22 ser: RAWID-0eb7-0011
3: Found device match in config from serial: RAWID-0eb7-0011
6: \\?\hid#vid_16d0&pid_0639#7&1f20b976&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Hardware found on ID: 1 name: PTR Pedals vendor: www.analogtousb.com ver: 2.10 ser: HB00010
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
Users browsing this forum: No registered users and 29 guests