Fanaleds forum

here is my lastlog.txt

https://drive.google.com/file/d/0Bxue9F ... sp=sharing

Do you need some more logs or is the one (good) enough? If so, i will post mine tonight when I'm back from work.

Hi I've just received my V3 pedals and have the same issue.

My log file data is as follows:

0: Log opened with debug level: 4
0: Log opened with debug level: 4
2: Setting up hardware
2: Beginning device enumeration
2: Error reading serial
2: Hardware found on ID: 0 name: ClubSportPedal vendor: FANATEC ver: 0.1 ser: RAWID-0eb7-183b
2: Error reading manufacturer
2: Error reading serial
2: Hardware found on ID: 1 name: G27 Racing Wheel vendor: ver: 12.38 ser: RAWID-046d-c29b
3: Found device match in config from serial: G27
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go


Matt

with debug level 6:

0: Log opened with debug level: 4
0: Log opened with debug level: 6
2: Setting up hardware
2: Beginning device enumeration
6: \\?\hid#wmvirtualdevice#2&25d493e&2&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_0eb7&pid_183b#7&243cae68&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading serial
2: Hardware found on ID: 0 name: ClubSportPedal vendor: FANATEC ver: 0.1 ser: RAWID-0eb7-183b
6: \\?\hid#vid_0458&pid_003a#7&731272c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_046d&pid_c29b#7&3a5fc58c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Error reading manufacturer
2: Error reading serial
2: Hardware found on ID: 1 name: G27 Racing Wheel vendor: ver: 12.38 ser: RAWID-046d-c29b
3: Found device match in config from serial: G27
6: \\?\hid#wmvirtualdevice#2&2b3e62a0&2&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
6: \\?\hid#vid_03f0&pid_0024#7&141529c3&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
2: Finished enumeration devices
2: Showing init routine
2: Hardware ready to go
5: Setting up GUI
5: Setting up notificationIcon
6: Running on DPI: 0
6: Form created with points: Left-75 Right-471 Top-81 Bottom-573
6: joystick G27 Racing Wheel:RAWID-046d-c29b => button 137 => value 128

There's loads more about the G27 I've left out.

Matt

Thanks for the logs guys. This should be enough for us to add support. We'll keep you guys updated when there's news.

Dirk has been working on the CSP V3 support, and I've emailed a few people to test out the new version. If everything is working like it should we will release the new version soon. Thanks for your patience.

hello,
can I use fanaleds to enable the new V3 pedals FFB in Assetto Corsa (widows 10)? How?

thank you in advance
Laurent

We're planning to release a new version with CSP V3 support soon.

Thank you for working on this. It is greatly appreciated!

Any update on this?