Fanaleds forum

Still doesn't work for me in F1 2017..
As for the gearing indicator that was one of the problems we had last time as well.

By default Fanaleds has this Output Sim on port 30500. Have you given a try changing it on the F1 2017 side to 30500?

Ok that got it working as such, but the rpm leds are permanently lit up and like you the gearing is +1.

RodentYell wrote: ↑

21 Dec 2017, 19:39

Ok that got it working as such, but the rpm leds are permanently lit up and like you the gearing is +1.

Try to change your RPM perc. value. I believe somewhere around 60-70 was good for us. But you have to try something.

Regarding the gear, we have to look at it. We had an earlier version of the game and it worked great, so they have something there it seems...

Bose321 wrote: ↑

21 Dec 2017, 19:53

RodentYell wrote: ↑

21 Dec 2017, 19:39

Ok that got it working as such, but the rpm leds are permanently lit up and like you the gearing is +1.

Try to change your RPM perc. value. I believe somewhere around 60-70 was good for us. But you have to try something.

Regarding the gear, we have to look at it. We had an earlier version of the game and it worked great, so they have something there it seems...

m_gear[0] is in fact the reverse gear.
Btw, that also means m_gear[0] and m_gear[1] should display 'R' and 'N' respectively.

Try to change your RPM perc. value. I believe somewhere around 60-70 was good for us. But you have to try something.

Yeh tried all of that and still lit up full, the rpm led's on the Fanatec rim work fine just the dash ones that don't.

In Project Cars 2 with Fanatec ClubSport Pedals V3 brake pedal keeps vibrating while holding the brake when car is stopped/standing still

Should the brake pedal only vibrate when wheel locks up while car is moving?

I was driving Huracán Super Trofeo and tried enabling and disabling ABS and TC while driving. Made no difference.

My gas pedal keeps vibrating in F1 2017 as well. I fixed the port to match what was in FanaLEDs at 30500 on InSim, OutGauge, and OutSim, and they RPM Perc. I Put to 65, and the LED's dont work either. I saw them all light up once, and then never again. What should my InSim, OutGauge, and OutSim all be set to, and What should my settings in in F1 2017?

Getting a prompt to update to version 'v'?
Seems like it's also on the website but wanted to make sure this is legit after last update's issues.

Cheers!

Update:

I'm impatient and hit the download button and Windows Defender immediately quarantined the file as malware. It did NOT do this with 'u' update so I'm thinking you guys have some malicious people attacking your site?

Reports as Trojan:win32/Azden.A!cl

https://www.microsoft.com/en-us/wdsi/th ... 2147244002

racer101 wrote: ↑

22 Dec 2017, 19:11

In Project Cars 2 with Fanatec ClubSport Pedals V3 brake pedal keeps vibrating while holding the brake when car is stopped/standing still

Should the brake pedal only vibrate when wheel locks up while car is moving?

I was driving Huracán Super Trofeo and tried enabling and disabling ABS and TC while driving. Made no difference.

The pedal should only vibrate when you are driving.
It might be engine rumble? Not sure.